Showing posts with label Protective Clothing. Show all posts
Showing posts with label Protective Clothing. Show all posts

Personal Protective Equipment


Respiratory protection

Exposed employees have to wear respirators:
  1. While feasible engineering and work practice controls are being installed or implemented;

  2. During maintenance and repair activities or other activities where engineering and work practice controls are not feasible;

  3. If feasible engineering and work practice controls are insufficient to reduce employee exposure; and

  4. In emergencies.
See the PERSONAL PROTECTIVE EQUIPMENT for guidance in developing a respirator program.
Employees who use an air purifying respirator must change filters whenever an increase in breathing resistance is detected. Employees who wear respirators must be allowed to wash their face and respirator face-piece whenever necessary to prevent skin irritation associated with respirator use. An employee must not be assigned to tasks requiring the use of respirators if a physician determines that the employee is unable to function normally wearing a respirator or that the employee’s safety and health or that of others would be affected by the employee’s use of a respirator.

In this case, the employer must assign the employee to another job or give the employee the opportunity to transfer to a different job which does not require the use of a respirator. The job must be with the same employer, in the same geographical area, and with the same seniority, status, and rate of pay, if such a position is available.

The employer must assure that a respirator issued to an employee fits properly and exhibits minimum face-piece leakage. Following a medical evaluation, each employee who will wear a respirator on the job must have a quantitative or qualitative fit test. This has to be done at the time of initial fitting and at least every six months for each employee wearing a negative pressure respirator.


Protective clothing

For any employee exposed to airborne concentrations of asbestos that exceed the PEL, protective clothing must be provided and required to be worn. The clothing may include coveralls or similar full-body clothing, head coverings, gloves, and foot coverings. Wherever the possibility of eye irritation exists, face shields, vented goggles, or other appropriate protective equipment must be provided and worn.

Asbestos-contaminated work clothing has to be removed in change rooms and placed and stored in closed containers which prevent dispersion of asbestos into the ambient environment. Protective clothing and equipment must be cleaned, laundered, repaired or replaced to maintain its effectiveness. The employer must inform any person who launders or cleans asbestos contaminated clothing or equipment of the potentially harmful effects of exposure to asbestos. Contaminated clothing and equipment needs to be transported in sealed impermeable bags or other closed impermeable containers and appropriately labeled.

Protective Clothing and Personal Protective Equipment


Add a note hereEngineering controls, which eliminate the hazard at the source and do not rely on the worker’s behavior for their effectiveness, offer the best and most reliable means of safeguarding. Make engineering controls your first choice to eliminating machine hazards. But whenever engineering controls are not available or are not fully capable of protecting the employee, ensure that protective clothing or personal protective equipment is worn.
Add a note hereFor adequate protection, the clothing and equipment selected must always be:
§  Add a note hereAppropriate for the particular hazards;
§  Add a note hereMaintained in good condition;
§  Add a note hereProperly stored when not in use, to prevent damage or loss; and
§  Add a note hereKept clean, fully functional, and sanitary.
Add a note hereProtective clothing is, of course, available for different parts of the body. Hard hats can protect the head from the impact of bumps and falling objects when the worker is handling stock; caps and hair nets can help keep the worker’s hair from being caught in machinery. If machine coolants could splash or particles could fly into the operator’s eyes or face, then face shields, safety goggles, glasses, or similar kinds of protection might be necessary.
Add a note hereHearing protection may be needed when workers operate noisy machines. To guard the trunk of the body from cuts or impacts from heavy or rough-edged stock, there are certain protective coveralls, jackets, vests, aprons, and full-body suits. Workers can protect their hands and arms from the same kinds of injury with special sleeves and gloves. Safety shoes and boots, or other acceptable foot guards, can shield the feet against injury in case the worker needs to handle heavy stock which might drop.
Add a note hereIt is important to note that protective clothing and equipment can create additional hazards. A protective glove can be caught in rotating parts, or a respirator facepiece may hinder the wearer’s vision. For these reasons, selecting the appropriate equipment is essential.
Add a note hereOther parts of the worker’s clothing may present additional safety hazards. For example, loose-fitting shirts may get entangled in rotating spindles or other kinds of moving machinery. Jewelry, such as bracelets and rings, or a belt buckle could catch on machine parts or stock and lead to serious injury by pulling a hand or the body into the danger area. 

Popular Posts